 |
Cellulose insulation
Cellulose insulation is an energy saving insulation product made from
recycled newspapers. Cellulose-a material used as wobbly fill insulation
is made from recycled wood fiber, primarily newsprint. The wood fiber
is ragged and crushed into small, fibrous particles that pack tightly
into closed building cavities; reduce airflow, which provides a thermal
resistance of R-3.6 to R-3.8 per inch. By adding chemicals to the cellulose
makes it creepy-crawly and fire resistant. The disadvantage of cellulose
is that it soaks up more water than fiberglass or mineral wool. This
becomes a problem if water leaks from the outdoors as cellulose wicks
water into itself and stores it. Too much water can also sluice away
the fire retardant.
Features of cellulose insulation
1. Endurance - It has proved its long lasting property since the last
50 years.
2. Versatility- cellulose insulation has come up with a strong potential,
which is used in every facet of the building.
3. Non-toxic property- research and studies have demonstrated that no
adverse health problem is associated with the cellulose insulation.
4. Performance- studies have indicated that there is no breakdown over
time in terms of fire resistance.
5. Sound control material -This has proved that it is acoustically superior.
Installation of cellulose insulation
Installation of wet-spray cellulose insulation into open walls is the
first step towards the cellulose insulation installation. The material
is distinctive cellulose insulation, simply recycled newspaper. Small
jets of water moisten the insulation as it leaves the nozzle of the blower
hose. The damp cellulose sticks to the studs and exterior sheathing,
completely filling the wall cavity. The moisture gets dehydrated before
the installation of the interior drywall, so it doesn't harm the wall
or affect the insulation value of the material. A stud scrubber, removes
surplus material and cleans the inside face of the stud. In the ceiling,
a blown-in-insulation is used. Plastic netting is extended along the
bottom surface of the ceiling joists to shore up the material. The end
of the blower hose is slot in through the netting to fill the cavity.
As an alternative of adding water as the cellulose leaves the hose, an
adhesive binder is mixed with the cellulose before it leaves the hose.
The binder helps to achieve forbidden densities that provide a uniform
insulation level of R-3.7 per inch, which comes to R-37 in this 10-inch
cavity.
Significance
Most cellulose insulation consists of ground, recycled paper (primarily
old newspapers) plus a chemical added for fire deceleration. The ratio
is roughly 85 percent paper to 15 percent chemical additive. Cellulose
is blown dry into attics and damp into walls. The dense material typically
generates an R-13 wall. It tends to give a little higher R-value for
the first loot in from the perimeter. . The insulation settles over time.
The sprayed products are prone to gaps. The product can burn, joining
in ceiling tires. Since cellulose is a denser product, it enjoys an edge
when it comes to house tightness. Dense-packing trouble spots - garage
ceilings beneath living spaces, fireplace and entertainment center bump-outs,
rim joists etc. - with cellulose contributes to house tightness.
Do it yourself Spray Foam Insulation
Spray foam insulation can seal the home from air or moisture intrusion. Spray foam insulation can save on costly utility bills and at the same time protect the health of the family from dangerous mold and dust. Spray foam insulation adds strength to...
High Temperature Insulation
High temperature insulation features a xonotlite crystal structure that results in exceptional strength and extremely low water of hydration. Super Firetemp.High temperature insulation is composed primarily of lime, silica and reinforcing fibers....
Insulation Heating
Thermal insulation is a very important aspect of home insulation techniques. Insulation heating brings energy efficiency and comfort to the house while cutting down utility bills to a great extent.
Indicators of poor insulation heating
If...
|