How to build a split rail fence?

A split rail fence is a traditional American fence. It dates back to the pioneer and colonial period to the civil war and the gold rush. These split rail fences are usually 4 feet high and the supporting beams are 10 feet long. However one can mix-match the height of this fence according to your convenience which is the main beauty of these rails.

Steps to install a split rail fence;

1) Pre-installation examination- before installing the fence one should investigate the local area rules. For example building codes which restrict where one can dig to place the fence or the height of the fence.
2) Digging a hole- after taking consideration of all the various building codes one can start digging a hole for planting the fence posts.
3) Attaching the crossbeams- the crossbeams of the fence have to be attached so as to support the fence.
4) Covering each section- each section has to be covered with fencing so as to conclude the installation process.

Appealing features;

One of the most appealing features is that it is very easy to maintain and does not require retouching of paint once it is installed. These rails are widely used till date mainly because it cannot be broken down so easily and that it can repel insects easily. It is easily to install and does not require many tools for its installation.
Thus it is user friendly, cost effective and maintenance free
The only drawback of this kind of fence is that it requires a bit of attention in its initial stages after installation. Once the fence is accustomed to its surroundings u need not nurture it so much.

Utility;

This fence can help keep horses and cows and other livestock; except for smaller animals; away from one's property. These fences are mostly preferred by farmers.

Problems encountered during installation and after;

Digging an appropriate hole for planting the fence posts could be a small problem initially.
Another problem faced is that over a period of time the fence may become unstable. The main reason for this is the accumulation of dirt in the conical holes. This problem is faced mainly in winter.
But as the saying goes; a stitch in time saves nine; these fences should be regularly inspected and repaired to avoid huge damages.

Installing split rail fence:
The Split Rail has proven more weather-resistant than Pine, Spruce, and Hemlock. Cedar also resists insect infestation. Western red cedar wood has a distinct color which left uncoated will weather to a silver gray color. Cedar split rail fence is...

Rail Fence Quilt Pattern:
Quilting History and Industry: Quilting is an age old method where pieces of cloth were joined to make square or rectangular blocks which were then sewn together mostly by hand, to get a quilt for those cold winter days and nights. Quilts were...

Rail Fence:
Why rail fence? Rail fence is one of the most attractive fences that can be built on any property and it is also one of the easiest to make. A rail fence enhances the courtyard and its surroundings as it demarcates property lines without...