The whirlpools and spa are exotic relaxation for aching muscles and joints. However, if you do not maintain the spa properly it can be breeding ground for many germs that cause disease. Let's take a look at how to keep the germs at bay and have a healthy tub of water.

Measures to keep the water clean and clear

1. By keeping correct level of disinfectant in your tub and by following a regular cleaning schedule and by testing the water chemistry at regular intervals can keep the bacteria that causes ear, eye and skin infections at bay. Bromine and chlorine are commonly used disinfectant. Though they kill the germs they also react with other organic materials in the water like dead skins, soap, shampoo, perspiration, body oils. UV or ozone treatment systems help to control bacteria. Spa suppliers generally recommend minimum disinfectant levels.

2. The chlorine of the water has to measure in two different ways at regular intervals. That is the chlorine that has not reacted with any particles and the chlorine that has already reacted with organic material. You get the" test kit" for this purpose when you buy the spa. To keep check on the disinfectant you need to shower before entering the spa.

3. Keeps the pump going 24 hours a day to avoid the stagnation of water. Else water in the tubs plumbing lines can become stagnant and become the breeding ground of the bacteria.

4. Monitor the PH and alkalinity level of the water to test the effectiveness of the disinfectant used as it depends on the chemistry of the water.

Tips to save energy and water

The spa uses a lot of water and energy; lets see how that can be reduced. Set the temperature below body temperature during summer. During the peak hours set the temperature timer to "off". Heat the water during lean hours and have a well-insulated energy efficient tub that will maintain the temperature for several hours after the heater is turned off. When on vacation turns off the heater. You should schedule the filtration cycles to maintain clear, clean and safe water. If the filtration is of low wattage pump then let it run continuously. Use spa covers that fits snuggly and also see to that cover is latched when tub is not in use. This will reduce heat leakage. Avoid wasting water by repairing any leaks and adjusting the jets to your height. Use windbreakers around the tub to prevent heat loss. Always use the tub which is energy efficient.

Hot tub dealers
A hot tub is a huge tub or small pool full of heated water and used for soaking, relaxation, hydrotherapy, reading, or meditation. In many of the cases, they have jets for massage purposes. Hot tubs are often located outdoors, although they may be...

Hot tub Review
The term Jacuzzi, spa and hot tub are really interchangeable. Jacuzzi was introduced by Roy Jacuzzi, Spa is the name of the city in Belgium which is famous for thermal bath and hot tub is the American concept of soaking in wine barrels or vats. ...

Hot tub rooms
Designing and planning your bathrooms or spa room is a tedious job. Since installing spa is an easy thing most homes do have spas or hot tubs in their bathrooms. Today baths rooms are designed keeping in mind the people's needs to begin and end...