Nylon
The fiber nylon was introduced first by the DuPont
Chemical Company in 1938. Several years later, after
a great deal of development, nylon became the first
synthetic fiber to be used in the entire carpeting
industry.

The first 3 generations of fiber experienced many
problems with the worst being staining. The 4th
generation fiber of nylon had a mill applied coating
that solved a majority of the staining problems. The
ability of the fiber to repel water and oil based
spills as well as soil helped to propel nylon into
the top selling carpet fibers out there.

After several other changes, the DuPont company
introduced the fifth generation nylon fiber. This
stain resistant fiber would repel most dye stains
if treated in a reasonable time. This fiber is
more accurately called an acid dye blocker in that
it doesn't allow acid dyes to penetrate and stain
the fiber.

The protective coating mill is applied and fills the
dye sites with anionic molecules.

Tip
An easy way to test fiber for the presence of a
fluorochemical is to cut a couple of fibers from a
non traffic area and apply a few drops of oil and
water mixture. If it beads up, then there is an
active fluorochemical present.

Whenever testing for the presence of the acid dye
blocker, you should again cut a couple of fibers
from a non traffic area, then immerse the fibers
in a red kool-aid mixture and wait for 5 minutes
or so. Remove the fiber from the liquid and
flush with neutral detergent solution. If the
acid blockers are present and active, there will
be no discoloration.

Polyester
The fiber of polyester was first introduced into
the garment industry around in the 1950s. By the
late 1960s, polyester was introduced into the
carpet industry as a face yarn. In hand, feel,
and appearance it is similar to nylon, although
it doesn't possess that same resiliency.

Polyester doesn't absorb water based spills, isn't
affected by urine or kool-aid, but it will
absorb oil based spills. Polyester is non allergenic
and mildew resistant.

Acrylic/modacrylic
Both of these fibers were first used as carpet
yarns around the late 1940s. They disappeared
around 1988 due to the competition from other fibers.
In was reintroduced to the market around 1990
in Berber styling.

This was done so that people could take advantage
of the wool like appearance, hand feel, and the
fact that its more spot resistant, much easier to
clean, and not damaged in the ways that wool is.

Olefin
Olefin is the latest of the synthetic fibers to
be adopted to carpets. Once only available in
continous filament, it is now produced in staple
form as well. Olefin has a wide variety of uses
that include primary and secondary backing of
tufted carpets, warp yarns, and other uses as well.

PPPPP

(word count 473)

Benefits Of Carpet
In the past and even today, carpet is very popular with home owners all across the U.S. Carpet is the most practical, fashionable, and versatile choice of flooring out there, as it also accounts for more than half of all flooring...

Dry Foam Carpet Cleaning
The dry foam procedure is mostly rather than dry as the name infers, although the content of moisture is so low that it can actually be referred to as dry foam (90% air - 10% liquid). The dry foam machine is equipped with a pressure tank,...

Reasons To Buy Berber Carpet
Everyone hears about Berber carpet, and just how great it can be. The carpet was named after a hand made bulky wool that was textured and used by a tribe in North Africa, the Berber tribe. The Berber carpet that is used even today follows...