If a homeowner takes up the task of cleaning any mold, the foremost thing to keep in mind is that basic personal protection equipment such as rubber gloves, eye protection and high-quality pollen or dusk mask be worn.

Locating mold to be cleaned

Mold can develop in places that have excess moisture and lumber seems to be an ideal resting place for collection of fungal spores on the surface of the wood. This kind of mold requires wet wiping and scrubbing to remove it, but simply wiping the wood can release spores into the surrounding air. So, the safer and preventive approach is to gently spray or wet down the mold prior to the removal.

Products for cleaning mold

Help is at hand for all suffering from mold and it's damaging effects on personal hygiene, health and home equipment as there are numerous products available, ranging from common bleach to commercial mildewcides (pesticides for mildew, specifically), which are promoted for cleaning mold from wood. The U.S. EPA (Environmental Protection Agency) suggests using a mild detergent and water for most molds clean up. It recommends wet vacuuming the area, wiping or scrubbing the mold with detergent and water and, after drying, vacuuming with a high-efficiency particulate air (HEPA) vacuum. Another do it yourself alternative could be using common bleach and water for cleaning mold. The U.S. Centers for Disease Control (CDC) recommends using a solution of 10 parts water to one part bleach to clean mold from surfaces. Stronger formulations of bleach and water may be used, particularly to remove the discoloration caused by the mold fungi. The Wood Handbook, published by the U.S. Forest Products Laboratory, recommends a solution of one part household detergent, 10 parts bleach and 20 parts warm water. The solution should be applied using a bristle brush or sponge to scrub the surface of the wood. One precaution to always take for cleaning mold and especially, when using bleach indoors, is to ensure there is adequate ventilation and wear personal protection equipment. Never mix bleach with ammonia or any detergent or cleansers that contain ammonia. When using commercial products for cleaning mold, be sure to follow the manufacturer's instructions for use.

Minimizing mold cleaning work

Determining whether mold is active (colorful, damp and slimy with a musty odor) or Inactive/dormant (dry and powdery) will help you decide cleaning measures.
Active mold can be colorful, and it is damp and slimy with a musty odor. Isolating materials affected by mold minimizes the spread of mold and protects those who may be having allergic or respiratory problems.

Black mold symptoms
The media often refers to Black mold as toxic or deadly mold and this fungi is us usually associated with Stachybotrys chartarum-a type of greenish-black mold known to cause heavy water damage. However, not all molds that appear to be black are...

Detect Mold
Moulds thrive on many organic substances and, provided with sufficient moisture, they rapidly break down wood, paper, and leather. In fruit the enzymes penetrate well behind the area of the visible growths to damage the plant. Besides being...

Mold control
Mold control is a far better option than mold treatment as it consists of simple precautions a homeowner can take to eliminate the possibilities of mold creation, spreading and subsequent damage to home and health. Of primary importance is the...